How can connect internet to linux through mobile

It is one of the big problem to the Linux user to connect internet to Linux though mobile. Before it take a look on the following. I am recently converted for Windows XP to Ubuntu 8.04 desktop edition because no long to use the priated OS and I am unable to purchased it. By the previews posting Request free Linux CD absolutely free of cost I got the free Ubuntu 8.04 Desktop edition CD absolutely free of cost to me. And I faced the problem to connect internet to linux with my mobile. I searched for this in many sites finally I got it on the Ubuntu support site http://help.ubuntu.com/community/CableDialup. There are explain easly step-by-step but I did some mistakes, anyway finally I connected internet to Linux through my mobile. It is better to see Ubuntu support site for better result anyway I want to share my experience with you what the mistakes I down when I try to connect. Lets start....
It is only for Ubuntu Linux or Debian based Linux users and I try to do for other Linux users. By my knowledge there are many flavors of Linux distributions are there like Ubuntu, Opensuse, Fedorla and more... Any Linux distribution can build there OS with Redhat Linux based(Redhat pack manager it is in format of .rpm) or in Debian Linux based(It is in the format of .deb). And my Linux is relateed to Debian based. Requirements I used:
  • I am used Linux Ubuntu 8.04 Desktop Edition (Debian based .deb).
  • I used Nokia GPRS supported mobile 3119ci or you can use any GPRS supported mobiles.
  • Check the softwares are installed in your system Wvdial and netenv. If there is not installed follow the command to install that. This two are dialup utility tools.
once again this is only for Ubuntu or Debian based Linux users: sudo apt-get install wvdial sudo apt-get install netenv
Other wise it is hard to install go to System--> Administration--> Synaptic package Manager it will shows the Synaptic package Manager and search the softwares by clicking search button on the top-right of the window and install them. Connect your mobile to the system through the cable and conform phone or modem mode. In this step I failed to see the port where my mobile is connected in syslog file. We can do it by pressing Alt + F2 it will shows the Single Command Line window and type /var/log/syslog and it will shows the syslog file. On Ubuntu support site say that we can see the dirver port /dev/ttyACM0 on the syslog file. But I failed to see the port. Anyway I want to go next step as follows. The next step is I opened the Gnome-Terminal (It is like DOS on windows) by clicking Applications--> Accessories--> Terminal on the top-pannel of the desktop or by single command line press Alt + F2 and type Gnome-terminal you can see the terminal window and type the command as follows.
$ sudo wvdialconf /etc/wvdial.conf Password: Scanning your serial ports for a modem. Port Scan<*1>: S0 S1 S2 S3 S4 S5 S6 S7 Port Scan<*1>: S8 S9 S10 S11 S12 S13 S14 S15 Port Scan<*1>: S16 S17 S18 S19 S20 S21 S22 S23 Port Scan<*1>: S24 S25 S26 S27 S28 S29 S30 S31 Port Scan<*1>: S32 S33 S34 S35 S36 S37 S38 S39 Port Scan<*1>: S40 S41 S42 S43 S44 S45 S46 S47 Port Scan<*1>: S48 S49 S50 S51 S52 S53 WvModem<*1>: Cannot get information for serial port. ttyACM0<*1>: ATQ0 V1 E1 -- OK ttyACM0<*1>: ATQ0 V1 E1 Z -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyACM0<*1>: Modem Identifier: ATI -- Nokia ttyACM0<*1>: Speed 4800: AT -- OK ttyACM0<*1>: Speed 9600: AT -- OK ttyACM0<*1>: Speed 19200: AT -- OK ttyACM0<*1>: Speed 38400: AT -- OK ttyACM0<*1>: Speed 57600: AT -- OK ttyACM0<*1>: Speed 115200: AT -- OK ttyACM0<*1>: Speed 230400: AT -- OK ttyACM0<*1>: Speed 460800: AT -- ttyACM0<*1>: Speed 460800: AT -- ttyACM0<*1>: Speed 460800: AT -- ttyACM0<*1>: Max speed is 230400; that should be safe. ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found an USB modem on /dev/ttyACM0. Modem configuration written to /etc/wvdial.conf. ttyACM0: Speed 230400; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
I got it, it will finds my mobile Nokia and successfully I taken next step. The next step is type sudo cat /etc/wvdial.conf command and changed the settings of the wvdial.conf file of as Phone=*99# and username=' ' (null if u have the username fill it), password=' ' (null if you have fill it) as follows and save it.
$ sudo cat /etc/wvdial.conf [Dialer Defaults] Modem = /dev/ttyACM0 Baud = 230400 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = AT+CGDCONT=1,"IP","web.omnitel.it" ISDN = 0 Modem Type = USB Modem Phone = *99# Username = '' password = ''
NOTE: In case u can try nano or gedit in place of cat in above command. And in the same way we can modify the settings of /etc/network/interfaces and /etc/resolv.conf files as follows.
$ cat /etc/network/interfaces auto ppp0 iface ppp0 inet wvdial
$ cat /etc/resolv.conf nameserver nameserver
NOTE: It is not necessary to modify the settings of /etc/resolv.conf file without it I connected. Haaaaa it is time to connet to internet lets Go.......and enjoy by typing the command wvdial it will show as follows.
mahesh@mahesh-Ubuntu:~$ wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+CGDCONT=1,"IP","internet" AT+CGDCONT=1,"IP","internet" OK --> Modem initialized. --> Sending: ATDT*99# --> Waiting for carrier. ATDT*99# CONNECT ~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~ --> Carrier detected. Waiting for prompt. ~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~ --> PPP negotiation detected. --> Starting pppd at Fri Jan 23 22:02:51 2009 --> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied --> --> PAP (Password Authentication Protocol) may be flaky. --> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied --> --> CHAP (Challenge Handshake) may be flaky. --> Pid of pppd: 6318 --> Using interface ppp0 --> pppd: ��[06][08][10]�[06][08] �[06][08] --> pppd: ��[06][08][10]�[06][08] �[06][08] --> pppd: ��[06][08][10]�[06][08] �[06][08] --> pppd: ��[06][08][10]�[06][08] �[06][08] --> local IP address 10.8.40.237 --> pppd: ��[06][08][10]�[06][08] �[06][08] --> remote IP address 10.6.6.6 --> pppd: ��[06][08][10]�[06][08] �[06][08] --> primary DNS address 202.56.250.5 --> pppd: ��[06][08][10]�[06][08] �[06][08] --> secondary DNS address 202.56.250.6 --> pppd: ��[06][08][10]�[06][08] �[06][08]
And it stay as above and don't close it when u close it the net willl disconnect it is better to move the window to last workspace (desktop) I forgot it in linux you can maintan multible workspaces (Desktops). And open your browser (In my Ubuntu Linux pack give my loved bowser Mozilla Firefox 3.0 I opened it) and type the URL address which you want to test the connection. Note the browser defaultly in offline mode remove it by click File-menu-->Work offline. The above steps will works 100% before you go to another method or another way be shure you are install the software are not, check your mobile is correctly connect to PC, once again check al the settings of mobile and PC, Check your mobile, datacable, USB port and any other devices with other system. Otherwise it is better to see the link http://help.ubuntu.com/community/CableDialup for better result or search on the www.ubuntu.com/ site for Ubuntu or Debian based users. What the mistakes I done ?
  • First I try to connect my mobile through Bluethooth Device it will connect and disconnect automaticlly after this I checked my Bluethooth devices in my friend system it is not working properly.
  • I am not propely conformed the settings of /etc/network/interfaces and /etc/resolv.conf.
I will try to connect internet to linux through bluetooth . Upto you can enjoy with cable ok.....

Share your profile information with Google profiles

Profile information is not only limit with Social-network site. We can share profile information with Google Profiles. It is a new feature to share your profile information yourself with your contacts. It is not a public service we can control your Profile information with your friends and family. you can put your informations as like on orkut and share it with your friends and family. For more details visit Google operating system (unofficial google blog).
Source from: http://googlesys.blogspot.com/

Download Youtube videos software and addons collection

Youtube is very hot site to share the videos online. But there don't enable to download it into your local PC. There are many software and addons are available in the site. Some of there are given below. Software:
  • Free Download Manager it is on of the free opensource download manager you can use is free of cost and Download. Features it supports all the browsers IE, Mozilla Firefox, Google Chrome, Opera, Netscape and more...
  • Orbit Download manager It is also the freeware you can use and Download it free of cost. Features it supports all the browsers IE, Mozilla Firefox and more...
  • Flashget is one of the free download manager software you can also use it free of cos and Download.
Addon for Mozilla Firefox:
  • Videodownloadhelper is one the recommended add-on to the Mozilla Firefox to download the videos from the Youtube site and other video sharing sites. Features When you open any video page in any video sharing site. It will automaticall detect and shows onthe navigation toolbar. You can just click and download the video in .flv format and play it with flash players like Adobe Flash player. an for for search.

Quickly create a new document and convert gmail messages into documents directly from Gmail

Quickest way to create a new document in Google Docs directly from Gmail by enable the "Create new Document" on Gmail Labs and activate the Keyboard shortcuts, and press g then w to open the new blank document.
You can convert the Gmail messages in to document without copy and past it. Just open your message and click "create new document" link on the right side of the page it will open a brand new document you can modify and share it.

Google Chrome 2.0 added new features on browsers ware

The Google chrome Browser taken new steps on the Browsers ware. There add new features to Google chrome 2.0 Pre-beta.
Form autofill: It is one of the mistake down on previous release. It is solved in the Released. Full-page Zoom: We can zoom the full-page not only text you it can also zoom the image and objects in the site. It will improves it with ctrl - (to zoom out) and ctrl + (to zoom in) and ctrl + 0 for return back to normal zoom. Autoscroll: By middle-clicking on a page and indirecting the direction. Profiles: It is great way to separate the Google Chrome's settings in to different profiles of individual Bookmarks, homepages, Browser history, Profiles and more... Other: it is also have features like Webkit.

Speedup your blog loading...

Slowly loading blog is one of the big drawback to the blog and blogger. It will be solve by the following steps.
Scripts: Javascripts is very hot thing in blogging for different function. So it is must and should to the blogs and the same time it is bad to blog loading. We can solve it by the follow.
  • Remove unnecessary, unused, unknown third-party scripts form the blog .
  • If any scripts is must to your blog maximum try to use alternative light-weight scripts which you want.
  • Mostly try to insert that scripts in last of the blog it means after the blog content.
Images: Inserting images in the posting is also one of the hot thing in blogging with out it we can not impress the visitor with your posting. So no way to remove the images form the blog . It is solve by following
  • Remove unnecessary and unused images from the blog template.
  • Compress images with image compress tools or with Gimp .
  • Using good and light-weight image formates like PNG and JPEG recommended this two are best to the blogging or for websites. GIF image formate is also is best.
  • Hosting your images in the image hosting sites like Picasa, Flockr, photobucket and more... we can speed-up loading images in the your blog because there server have a special technology to load image quickly. Blogger.com users have no problem to host there images in the image hosting sites it will automatically uploads images to Picasa webalbum when you are posting.
  • Minimize number of images inserting in the posting.
  • We can also optmize your images on Dynamic Drive, Image Reducer, Net Mechanic Spin Wave and much more...
Attention on Blog Home page Posts: More number of posting shown in the blog home pages is also slowdowns the blog loading. It is better to limit the number of posting show on the blog home page. So we can follow the steps below:
  • Limit number of postings on your blog homepage.
  • If you want to index more... no. of posting it is better to display or show only title of the posting with 250 characters of body of the post. It means only shows the Title of the post and the 250 characters of post body.
On Templates Building: Blog templates is one of the most hot section in the blogging. Most of the bloggers think and wants the nice and rich templates for there blogs. It is very useful to attract the visitor for look and feel. But it is bad to the blog loading. Because on nice and rich blog-templates used large number of images and weighted images for the template build and it is inserts before the content of the blog so it takes more time to load main content of the blog. It is bad news to the bloggers but there is an another way to build your blog-template for look and feel to attract visiters. It is simple Just search for the limited number of images used in blog template like WP-polaried in this template used the light weighted and limited number of images for move templates see the Top Visible Templates on btemplates.com/. mostly use less number of images in your blog It is best to build your own template by choosing the minima template in the blogger.com/ and for other blogger it is better to reset the CSS style and layout of your blog. Don't use table for building layouts mostly use <div></div> for design layout for blog template. Advertising: It is better to choose the advertising networks to advertise on your blog. Because there have latest technology and number of code formates (PHP, Jscript, HTML and more...) to supporting and load fast. In other way you can use best and top rated server-side tools for advertise on the websites. Other:
  • Use Slash (/) at the end of URL address like http://tips4ever.blogspot.com/ .
  • Use Validate code to build the template.
  • Build your blog template and Validate it is support to all browsers.
  • Refer for standard code on www.w3c.org/ .

Protect your blog form hackers

I tried about this topic in many times finally by the refer of  some blogs I collected the following steps to protect blog and websites form hacking.

Do not use Public Computers:

      This is most important point to secure you blog. The public computers means net centers and third-party systems. In the net center there are number of persons will use and there open unnecessary sites to crack the software or for adult content. It results to entering virus, spywares, marewales and much more... by this the keyloggers also enter in to the computer. The main work of the keyloggers is getting information by the keyboard strings and it will send to the third-persons(means crackers). And it results to lose your account. So do not use the public computers.

Keep your blog information privately:

      We can keep your blog account information privately do not say to anybody and do not write in any where.

Use original or free edition security software:

      We can use the original (registread) or free edition security software to your system. For example some of the persons crack there security related softwares from the craking sites and it will result do not detect some attacks to the systme. It result to lass your information.

Must and should use Spyware removible tools:

      Spyware removible tools make a greate role in the online security. We can must and should use the spyware removible tools. there are many spyware removible tools are freely availbe in the net we can download and install of the them. I recommende ad-war and Spyboot are the free and best product is the best and free spyware removible tools.

Host your blog in your own server:

      If blogging is your full time job it is best to host your blog in your own server. It means we can host your blog by purchasing a own server from the hosting providers like Godaddy, enom, yahoo small business, bluehost, vodahost and much more... there have addition security to your blog when comprave with free blogging providers. Some of the hoster provides the free own domains to you.

Set your Browser performance in security Level:

      We can also set browser performance in high or medium level do not set as low level.

Add look and feel to your display code on the blog post or on the webpage

In previous post we are describe about how to display the code in the blog posting and in the web pages and it is time to add some look & feel to the displaying code area by adding background color and border to the code area. Just add the following code in above the b:skin> for the blogger.com user and for old blogger.com, wordpress and webpage means webmaster add the below code in between <style type="text/css"></style> as follows
.codeview { background:#F5F8FA; border:2px solid #D7E8F0; color:#000000; font-family:"Courier New",Courier,monospace; font-size:12px; line-height:14px; padding:10px; }
After that you can use the above class by using <div> like follows
<div class="codeview">Your code here...</div>
and enjoy......

Display codes or codeview in blogs postings and in webpages

Codeview on your blog posting or in webpages
Display code on webpages or in Blog postings is knows as codeview, viewcode and more... It is very hard to develop in HTML or in any program. It is easily do on the previews posting with the help of Scribefire without any programing knowledge for the bloggers and for webpages you can use text-editors which is have a Rich edit and code edit mode like Dreamweaver it will convert automatically. But in pro blogs comments there are asking the code for design and develop the codeview. For that I collected the code to develop codeview.
Character Entity Number Entity Name Description
" " " quotation mark
' ' &apos; (does not work in IE) apostrophe
& & & ampersand
< < < less-than
> > > greater-than
For More... http://www.w3schools.com/tags/ref_entities.asp

Host your own blog with Thingamablog Application

      Many blogger host there blog in there own web server by upload and install some script tools in there server like wordpress.org, b2blog and more. But with the Thingamablog we can just install it on the local PC and edit blog post in offline and then publish it through FTP, SFTP and network access to the web server. And when coming to the template default 10-15 templates are there. There are simple to look and feel. If you want nice templates it supports all Blogger templates by modifying the blogger data and widgets and more.... For more information visit there home page http://thingamablog.sourceforge.net . Features:
  • Set up a blog in minutes via an intuitive wizard
  • Maintain multiple blogs
  • Effortlessly manage thousands of entries
  • Dynamically update blog content
  • Write entries offline (Dialup users)
  • Publish your blog with a single click
  • Publish remotely to your blog via email
  • Read news with an integrated feed reader
  • Make posts from your favorite feeds
  • Create a unique layout with customizable templates
  • Import entries from RSS/Atom feeds
  • Set up flexible archiving options
  • Organize your entries by category or date
  • Save entries as drafts
  • Define your own custom template tags
  • Syndicate your blog via an RSS or Atom feed
  • Ping services like weblogs.com, BlogRolling, and Blo.gs
  • Supporting OS Windows, Mac OS X, Linux
  • And much more...

Display codes on your Blog postings by the help of Scribefire


      In previews posting we are discuss about the Scribefire . I am miss one of the great feature is to display the code in the Blog posting. Before this I am  type code in the word process application which the code I want to display and it is save as into HTML file after that it will open in the Text editing application and copy the code and past it into the post. It is too problem to me.
      But it is simplified by the Scribefire. I am in the Rich edit mode I just type the code which I want to display it will automatically display when I published it. There is not need to add anything to that it will simply display the code on my posting.



Add favicon to your Blog or Website

Add the fav icon to your Blog or to Website like as bleow
Add the following code in between head tage "<head> </head> " and save
<link type="image/x-icon" href="http://tips4ever.googlepages.com/icon.ico(replace it with ur icon url)" rel="icon"/> <link type="image/x-icon" href="http://tips4ever.googlepages.com/icon.ico(replace it with ur icon url)" rel="shortcut icon"/>
NOTE: In previews posting I am said about how to create icons and upload it it you r Googlepages account or to any free hosting accounts and link it with on above code in the place on Icon URL

Add meta tag to build web traffic for Blogs and Websites

We are know about the Meta tag in the develop of the HTML document. But now a days by the developing of the user friendly web apps we are forgotting about the basic web design codes one of that is Meta tag. It is simple to leason but it is very powerful to build web traffic. What and Why you can use Meta tag ? Meta tag is used in the developing of HTML documents it mean wesite or webpages. It is used in below the head tag "<head></head>". It is used to give information about your Website or webpage to Search engine when the user search. We can code Meta tag as below.
<meta content="Tips4ever is an online tech Guider that helps you in taking maximum advantage of the software tools and web technologies at your disposal so that you spend more time doing things you really love." name="Description" /> <meta content="tech news, technology, computers, software, internet, web 2.0, censorship" name="keywords"/>
The first Meta tag is used for description of your Website and the second Meta tag is used to the Keyword for search results match.

Add Subtitle for your Blogger blogs posting


      It is one of the problem to the blogs to put the multiple titles to there posting for that you can add the following code to you template and to post as shown below.

      First of all add the following code before the </b:skin> or the old Blogger.com user add before the </style>.

.subtitle{
font-family:Georgia, "Times New Roman", Times, serif;
font-size:20px;
color:#555555;
line-height:28px;
}


And after that you can add the following code to your post as follows


<div class="subtitle">This is a subtitle</div>




Edit your blog with Scribefire It is a Firefox addon

The main problem to the bloggers is to edit the blog posting in online. It is too more problem to the slow Internet (Dial-up) Bloggers. For that there are many software on net. But I am not satisfied. Finally I got a addon for the Mozilla Firefox name is ScribeFire. It is a Blogeditor. You can edit any blogging service blog like Blogger.com, Wordpress.com, Wordpress.org (own blog hosting service), Typepad, Livejounrnal, Drupal, Roller, Tumblr and more... by this blogeditor. Features:
  • Lightweight
  • Maintain multiple blogs form multiple bloggeing services including own blog hosters also.
  • Categorize and tag your blog postings
  • Preview your post in offline
  • Upload Photos to Picasa, Flockr, Photobucket and much more...
  • Edit in Normal and Code mode
  • Insert Photos and Videos for online sites like Picasa, Flockr, Youtube, Google Video and much more...
  • Save posting in offline and Publish it latter
  • Maintain your blog postings
  • Formating Text as like font, color, bold, underline, paragraph and more....
  • Upload files to FTP
  • Share your posts on social websites
  • Set timestamps
  • Inserting Hyperlinks and much more.....
Installing and using: It is very simple to do. JustDownload the Scrabefire . and Insert it in Mozilla Firefox Tools-->Add-ons it will install and restart your Mozilla Firefox browser. And that click Scrabefire from Tools-->ScribeFire or press shortcut key F8. it will open on the bottom of the Firefox browser like shown below.
1. After that It will automatically shows the Account Wizard or we can click add button in the right-side of the Scribefire in blogs tag. 2. Entire your Blog URL and click next button. 3. It will scans and shows your blog information as blogging providers name and your blog ID URL and click next button. 4. Entire your username and password of blog account and click next button. And It is ready to use the Scribefire for you.